Interestingly to your example, there seems to be a rough consensus that the bronze age collapse (~12th century BC) was related to the fact that iron production was less centralized than bronze, which required multiple long-distance supply chains that could be monopolized by regional powers. Different folks point the causality in different directions.
Some technologies are inherently more centralizing, some are less so.
I agree that most technologies can be applied for imperialistic interests, and the tech space is full of things that seemed decentralizing and have since been captured, but it's not quite law.
IC manufacturing is basically a modern global palace economy full of shipping and single-player choke points and large capital investments, so it leans hard to the centralizing side.
It's less clear that AI will work that way, if it turns out that it is relatively practical to do useful work on locally hosted models it might end up being somewhat decentralizing.
Or, we'll get technological and/or regulatory capture, end up paying rents to technofeudalist douchebags with data centers and proprietary models who bribe governments and peek at user behavior and try to use their already vast resources to preemptively capture any value before anyone else can, until the next major perturbation.
I find hosted/hybrid machines particularly fascinating, so I have a 6100/66 DOS with a Houdini II Nubus card and a Education-market LC with the Gemini-based Apple IIe PDS card that I've collected over the years.
They are ...weird... machines.
Both have a (different) extremely bespoke Y cable that are almost required, such that if you find a card separated from the cable, you probably shouldn't pay much for it.
The IIe card has a little lag in the video circuitry compared to the real thing (at least in a first gen LC host, apparently that problem goes away if you stick it in a faster machine with a 24-bit PDS slot).
Coaxing the Houdini II to boot things that are not fundamentally MSDOS is always a good way to throw away a couple hours, but it does a great job of convincing anything up to Win95 that it's a PC. Performance is absurdly better with dedicated RAM.
There are a couple other things in the family, the MacCharlie and AST Mac86/Mac286 products for bolting PC hardware onto various Macs, and the later OrangePC cards (they ended up with the IP from both Apple and ASTs offerings). The apex of "weird hosted computers you can stick in a Mac" are probably the MacIvory (LISP machine on a NuBus card) products, but those are "costly and rare," and are infamously balky even if you do get the hardware (...and I just don't enjoy Lisp).
Sun had a SunPC/SunPCi line in the same vein that will bolt a PC-on-a-card into various SPARC hosts.
Commodore had that first-party Sidecar product with a PC-XT in a box for Amigas, and there was ShapeShifter that would let you fake a Mac semi-native on a 68k Amiga. Likewise DayDream (recently updated into DarkMatter) to run a Mac environment on a 68k NeXT host, both of which "needed" Mac ROMs attached on a dongle for license reasons.
MAE is emulation, but it was an Apple-blessed way to run MacOS hosted on contemporary Unix workstations of the early 90s, which is sort of the opposite. I've managed to prod it onto a (real) PA-RISC/HPUX host, and (emulated, because my SS20 has been super balky as long as I've had it) SPARC/Solaris host just for sport - I'm pretty sure it was built out of decapitated A/UX parts and an emulator when A/UX4 didn't happen.
I'd like to round out my set with at least a IIe with a Premium Softcard IIe at some point, but I'm not willing to pay ebay prices for any of that stuff.
Both the Apple LCII with the Apple //e card, 5-1/4 drive for it and the Apple //e joystick and the PowerMac 6100/60 with the DOS Compatibility card exists somewhere in my parent’s house.
I have no idea where my 5-1/4 disks are. But I know where the 3-1/2 disks are for my Mac. They aren’t in the attic. They are in my childhood bedroom.
My old Apple //e though is lost forever.
I don’t have any real sentimental attachment to the hardware. If anything, i am going to eventually take the time to rin emulators on my Mac.
Since the 6100/60, I’ve only bought them three Macs - a G4 Mac Mini, an Intel Core 2 Duo Mac Mini and my current M2 MacBook Air. The rest have been cheap PCs. I don’t really use my personal computer for much of anything.
I have a copy from the kickstarter, it's the best and most expensive ($175) thing I've ever gone in on crowdfunding for.
Absolutely beautiful books. Great photography, they even worked up their own typefaces and do fun typographic things all over the place. Well written and deeply _deeply_ researched.
I have very few complaints, maybe the section on chorders is a little thinner than I'd like, but that's a pet interest of mine and I've chased down a bunch of material so my perspective is weird.
From the kickstarter updates, the original run were an ordeal to make, but I really do hope there is enough interest for a second printing at some point.
I see news about those, mostly from friends doing recreational things with FPGAs.
I guess also relevant since they've managed to crowdfund three (substantially upgraded from generation to generation) runs of them.
It's a lovely little machine, and since November there is also a "core" you can load into the FPGA which turns it into a (heavily upgraded) Sinclair QL.
This makes it one of the more affordable ways to get new QL-compatible hardware, 40 years after the machine launched. It has lots of RAM, 16-bit colour graphics, sound, and more. It runs Aurora, one of the 2 FOSS forks of the QL OS.
Work is underway on enhancing the core further, possibly to a 68030 with 16MB of RAM and true-colour graphics (if I remember rightly!) and to improve integration of the upgraded capabilities with the OS and SuperBASIC.
There is some hope it might be able to run SMSQ/E, the other FOSS fork of the original QDOS OS, and that comes with a choice of desktop GUIs.
It's a deeply idiosyncratic OS (never mind predating Windows, it predates the Apple Macintosh) and I have not yet learned to drive it, but I like the idea that my 21st century Spectrum is now also a rather capable full-16-bit machine with a multitasking OS.
The QL is largely forgotten now except by enthusiasts, but it was arguably the first multitasking home/small-business microcomputer, and there is new QL-compatible hardware still on sale: the Q68 machine, also based on an FPGA.
Neither Aurora nor SMSQ/E is seeing much development now, sadly, but then I believe they're in hand-written 680x0 assembly language, and they only run on a handful of long-obsolete hardware, basically QL clones and the Atari ST.
It's an interesting OS and I wish it had been more successful. I also wish that SuperBASIC had been ported to other OSes, since the source is available. I think I'd quite like SuperBASIC for Linux.
I have a long fascination with weird input devices, owing partly to a predisposition to fine joint problems, and Chorders are always both super interesting in theory and kind of weird in practice, going all the way back to the Engelbart/SRI 5-key Keyset that was carried forward to the Alto.
Of the ones I've played with, I find the 7-key kind (4 fingers and 3 thumb positions) to be the most appealing, and I don't see them mentioned in the thread. Infogrip has sadly discontinued their commercial BAT offering, the "Spiffchorder" family ( https://www.chorder.org/wiki/doku.php/start ) use the same chord-set and are designed to be cheap and easy construction - I've made a few in different physical arrangements. I'm too qwerty habituated and never got _completely_ comfortable, but I've been up to tolerable a couple times.
My "normal" typing is mostly on conventional splits (Kinesis makes make some nice off-the-shelf options that just split and tent), largely to avoid shoulder issues. I recently tried a ortholinear split and... I'm pretty convinced they really don't have meaningful benefits.
I've been using Warewulf (&co.) for provisioning bare-metal clusters for decades (back into the Perceus days between Warewulf 1 and 2), it's a solid easy-to-comprehend tool that does things in ways that are transparent and built from generic [u/li]nux tools enough that they're not hard to think about when needed, but automated enough you usually don't have to.
Definitely shows its research roots, best-tested with RHEL-alikes, reasonably well tested with Suse and Debian, and you may be in for some extra work if you need provision something else, but that pretty much covers the common cases (and it integrates with containerization tools if you need some specific environment on the nodes).
It's a nice to have when you need to spin many nodes.
It’s that old? I can’t believe it took me this long to find Warewulf! I’ve tried the more complex solutions and this looks like what I’ve always dreamed of
Always feels like it will be simpler... you start with some iPXE, start building, and 6 months later you have a poor imitation of a product like this that works only for your specific use cases and causes you a headache if the company pivots and you have to make it do something new.
Been there, built that. Next time I'm using something with a community, and if it doesn't do what I need, I'm contributing upstream until it does.
I'm local, I know a ton of former Lexmark people, because they've already been all-but dead in Lexington for some time. They mostly only did R&D here for decades, and that group has been dwindling.
Large groups of Ex-Lexmark folk have ended up in other local tech companies, many ended up at OpenText (via HP via Exstream, the eventual successful startup from a local serial entrepreneur that basically makes the tools to do semi-individualized bulk mailing like bills), Badger (robots for doing retail work) was founded by folks leaving Lexmark, etc.
Amazon has been buying up their old buildings (long, long ago it used to be a sprawling IBM campus that did typewriters, printers, keyboards, compilers, EMI testing...) as they contract.
Like much of the US, Lexington has lost a bunch of manufacturing, but IBM/Lexmark as a major entity is already long gone.
It is funny that they've been bought by a cartridge cloner, and foreign private equity, and are now being bought by a competitor, they keep dying in new ignominious ways.
I really want to know what the deal is with OpenText (formerly MicroFocus). If you're not careful they will eventually buy your business and you will disappear.
> OpenText offers cloud-native solutions in an integrated and flexible Information Management platform to enable intelligent, connected and secure organizations.
It certainly is a bit of a novelty, but there are a few Theremin-featuring pieces that I find pleasing, a classic example is the Theremin and piano arrangement of Saint-Saens' The Swan.
Here is Clara Rockmore performing it (I think this is a video of the recording on The Art of the Theremin) https://www.youtube.com/watch?v=XdFSU8sn3mo . There's a very nice arrangement of La vie en rose from the same sessions.
She developed a lot of the Theremin techniques and - despite some argument about how practical vs. performative they are - is likely the best Theremin player ever. She was previously trained as violinist and an answer to why you would _play_ a theremin: her tendinitis killed her violin career but could keep playing music with the force-less theremin.
> There are also a surprising number of well-known pop (etc.) songs that include a theremin somewhere.
There are definitely some strong uses of theremin in there, but after sampling a few I also found some that I don’t think are theremin at all, which makes me wonder if that’s a common theme - whether a good chunk of that list isn’t theremin, but other instruments.
For example, Wonderboy (Tenacious D) seems to be using a synth with portamento (aka glide), which is pretty common and does sound a little like theremin while the pitch is sliding, but ultimately gives a very different effect, mostly because when it reaches the target note, it holds the note strongly. Theremin’s effect tends to be disorienting because you can’t hold an exact note, so it’s either sliding around or people use a lot of vibrato.
Another one I confirmed is not Theremin is Lovely Head by Goldfrapp. Again, this vaguely sounds like it could be a theremin, but there are plenty of signs it’s either heavily processed and edited, or just not a theremin. My first guess was a guitar under heavy filtering or via MIDI, but then I found this: “ What is often mistaken for a theremin synth in the song is, in fact, Alison's vocals manipulated through a Korg MS-20 synthesiser.” https://en.wikipedia.org/wiki/Lovely_Head
I love the Computer-Hosted-In-A-Computer products (for absolutely no good reason), I have both one of the education market Mac LCs with a IIe-on-a-chip in the PDS slot ( https://en.wikipedia.org/wiki/Apple_IIe_Card ) and one of the slightly later PowerMac 6100/66 DOS with the first-party "Houdini II" 486 DOS card - The Houdini IIs are SoundBlaster 16 compatible (...ish) and the Is like the 610s bundled had kind of janky sound, so they're a little more "useful" (insomuch as a feeble 30 year old PC hosted in a 30 year old Mac is "useful").
The firmware is "uncanny valley" level mutant; it looks enough like a PC for DOS/3.1/95/98, and there are shim drivers to use the shared-in peripherals, but anything that does more direct hardware access will immediately notice it's not a PC and freak out ...that said, Despite claims that it's impossible, I did once get it to boot a minimal Linux system (IIRC some bullshit with a Tomsrtbt disc set and loadlin to chain load it from DOS, it was quite some time ago) - _barely_ functional, useless, but fun.
Amusingly, the vast majority of the DOS cards for Macs are lineally related, Phoenix Technologies designed the first gen cards for Apple, sold some aftermarket through AST Research, then Orange Micro bought the line from them and made most of the later aftermarket options.
...I'd love to complete the set and find a MacIvory/MicroExplorer or something, but I don't actually care for Lisp and the people who do have made the prices on working NuBus boards astronomical.