I haven't looked into the Moderna vaccine but in general there are many ways to get rid of a virus. Using the typical B cell + viral glycoprotein is the most obvious way as viral activity is hard to detect when replicating inside a cell but there are many stages in the viral replication process which can be inhibited. Inhibiting protease cleavage of the viral polyprotein or preventing polymerase formation are all possible solutions. They don't really count as vaccines though.
Fwiw, rarely can lab designed viruses i.e. made through splicing have features that are more "optimal" (or efficient) than those that are evolved. Directed evolution is truly marvelous when done properly (it won a Nobel!).
The math sounds nonsensical. The risk adjusted exposure from a reactor should definitely be higher as you would be closer to the threshold of DNA bond breaking. Being stabbed once a year isn't necessary better than getting hundred paper cuts. Any actuaries here care to comment?
There are mountains of literature and regulations on this and the math just kind of works that way (up to some limit, beyond which acute radiation effects will begin to dominate)
There is now some thought that very low doses of ionizing radiation are better than no radiation at all (so called 'radiation hormesis'), but I don't believe that has been adopted as part of any specific standard.
FWIW an individual person may be experiencing up to a trillion DNA mutations per day from both external and internal mechanisms of action. We just have a bunch of systems built in to prevent them from getting out of control (most of the time).
> The risk adjusted exposure from a reactor should definitely be higher as you would be closer to the threshold of DNA bond breaking.
How are you so certain? You don't know the specifics of the situation. If he worked underwater for a year and spent half a day working on a reactor in protective gear it could easily even out.
He is not saying the overall exposure may not be same (it could be) he is saying risk of cancer or other bad side effects may not be equal in both scenarios.
That's not true. I just did a high-quality sequence and assembly of a new species of fungus from my home lab using nanopore. You can see all my code used for assembly and analysis that will be referenced in a paper I plan to publish in Jan here: https://github.com/EverymanBio/pestalotiopsis
Given that the decoder is machine-learned and depends on a training set to go from squiggle -> ATGC..., how do you ensure that sequences which haven't been seen before (not in the training set) are still accurately accounted for?
We used Guppy for basecalling, which is neural network based and used to turn raw signal data into the predicted bases. There're no guarantees of accuracy, only tools to determine and assess quality. One major way of assessing accuracy is to compare the subject genome with other similar reference genomes and denote the high-degree of homology in highly-conserved regions.
My question is if in the future, we would be able to fully rely on translations to predicted bases for sequencing or if there would always be a need to compare with a different sequencing methodology in the case of de novo genetic information that previously hasn't been seen before (no reference genomes being available in that case).
Is there publicly available information on how accurate Guppy is, as well as how the amount of training data scales with improvements in accuracy?
It didn't seem like these things were mentioned explicitly in the Community Update, other than that it’s expected to continue improving, but a clearer roadmap would definitely be much more helpful.
There are quality checks throughout the entire process, starting from the raw read quality scores returned directly from the sequencer all the way to fully assembled genome completeness. In our paper, one of the tools we used for this is called BUSCO[0] which scored our assembly at 97.9%, a relatively high score for de novo assemblies.
Interested outsider here; I work with a lot of HCLS research customers but don't have a biology-related background. Can you explain the problems with the Nanopore sequencer accuracy in more detail? Basically, I was wondering if I could get one for myself and sequence my own genome, then user the data to learn about life-sciences computing techniques. If I were to buy one of the USB-attachable devices and run it, is the data simply not viable for use in a genomics pipeline, or is it just that the results would be questionable? Also, if accuracy is an issue, what about just running the same sample N times and doing some error correction?
I guess there are limits to ensemble methods if the underlying accuracy doesn't increase. I don't work on gene sequencing algorithms but from what I understand of ML ensemble techniques, there are certain assumptions regarding the underlying independence of the errors. The errors for nanopore should be uniform but I am not sure. Any molecular biologist here care to comment?
I know that the error rate of the oxford nanopore sequencer depends on GC content (guanine/cytosine nucleotides), and that the Pacific Biosciences sequencer uses a polymerase that gets worn down during reading. So there is some non-uniformity in the chemistry.
The instruments do exactly as you say (run the sample N times), but this obviously comes at a cost. Also, keep in mind that sequencing needs to be very, very accurate to be useful. We share most of our DNA, and the small variations make up all the difference.
Yes, those are all relevant costs. There's also a tradeoff between accuracy and the number of reads (how many sequences you can observe), or how much data you can get out of the machine.
Tl;Dr: Nanopore data is historically lower quality than current gold-standard methods, but it is by no means "not viable" in a genomics pipeline. Their newer chemistry flowcells are competitive with current gold-standard (but I've not seen it with my own eyes in the lab yet due to limited release).
There are two components that drive sequencing error rate. 1) The chemistry behind the sequencing (for nanopore sequencing this is the "feeding DNA through a pore" bit) 2) the method to convert raw signal into DNA sequence (this is called "base calling").
The gold-standard in terms of error profile for sequencing is currently the Illumina short read platform. Illumina machines are really just microscopes (TIRF scopes for optics folks) that sequence DNA by visualizing incorporation of dye-labeled nucleotides into the sequenced molecule(s) (Imagine a really slow PCR [1]). Each base is labeled with a different color, then when a molecule has a match it makes a colored spot on the slide that the machine can read (see here for more info & details of newer chemistry that use fewer colors [2]). This whole process is mediated by DNA polymerase which itself has a very low error rate. Another important point is that DNA sequenced on the illumina platform (called a "library") tends to be from "amplified" template DNA, meaning the DNA will have been processed and potentially be missing chemical modifications on the bases that could be present in the organism. This works to Illumina's advantage, because when trying to answer the question of "what is the DNA sequence?" we want the ground-truth DNA, not the modification state.
In contrast, Nanopore sequencing works by feeding a long strand of DNA through a pore and measuring the change in electrical current through the pore (watch the cool video [3]). For the current set of nanopore flowcells, 8 bases of DNA sit in the pore at a time, meaning the current at each timestep is a product of 8 nucleotides in aggregate. This also means that the pore "sees" each base 8 times, but always in the context of an additional 7. In order to basecall from the raw signal, it's not as easy as saying "blue = A", instead, you have to deconvolve each base from a complex signal. As you might imagine, the folks at Oxford Nanopore & broader research community have turned to machine learning-based base callers to solve this problem, and they work quite well [4]. But they are not perfect.
Deconvolving runs of the same base (e.g. "AAAAAAA") is difficult because without well-defined signal changes between bases, the caller has a hard time deciding how many bases it has seen, so a common error mode for nanopore sequencing is to create insertions/deletions at places in the genome with low nucleotide diversity. Another interesting reason is that most Nanopore library preps are often performed on unamplified DNA, and so in addition to normal A/T/G/C nucleotides, the template DNA can also contain bases with chemical modifications. For example, in bacteria, A's are often methylated, and in Humans, C can have all kinds of different modifications (5-methyl-cytosine, 5-hydroxymethyl-cytosine, etc. etc.) and each different modification affects the signal in the nanopore. Therefore, basecallers that weren't trained on modified bases will produce basecalling errors in the presence of base modifications.
For both Illumina and Nanopore basecallers, they assign a quality score to each base that indicates the probability that the basecaller produced an incorrect value. This is called a Q-score, which is defined as "Q = -10(log10(P-value))" (i.e. Q / 10 = the order of magnitude of the error probability) [5]. For example, a Q-score of 10 means an error rate of 1 in 10, but a Q-score of 50 means an error rate of 1 in 100,000. For Illumina sequencing, >95% of the reads have a Q-score > 30 (i.e. 1 in 1000 errors), while Nanopore reads tend to have lower average Q-scores (~Q20, i.e. 1 in 100 errors). For genetics, where 1 base difference can mean the difference between a severe disease allele vs a normal variant, 1 in 100 won't cut it.
The current gen Nanopore flowcell chemistry (R9.4.1) is what most people are talking about when they talk about Nanopore error rates, but they've just released a new pore type & made some basecaller upgrades that improve the accuracy to what they call "Q20+" and some claims of Q>30, and from the data I've seen, it's impressive, I just haven't got my hands on one yet to see for myself [6]. I think the comment saying "wait 5 years" is an overestimate, but if you want to genotype yourself today, I'd just pay someone for Illumina sequencing and process the fastq files yourself if you really want to do it as a learning exercise.
I've unintentionally written an essay, so I'll stop here, but real quick to your other point RE: rerunning the sample N times & using the repeats for error correction. This won't work the way you're thinking because a "sample" is actually a collection of DNA molecules that are sampled randomly by the sequencer. You have no way of knowing that the same read between runs was actually from the same molecule, so you can't error correct this way. Consequently, a totally different sequencing platform from Pacific Biosciences uses this strategy by doing some really cool chemistry, but I'll spare you the second essay (google "PacBio HiFi" or "circular consensus reads" if you're interested).
I for one am glad you wrote the essay, this was incredibly informative and filled in a bunch of blanks I had after reading what I could scratch together on the MinION product. I think I'm in a partial state of shock at how accessible this is becoming. Thank you!
Thanks - fascinating stuff. I'm now even more convinced I want to give it a try, but I think I'll play around with public data and tutorials before leaping into home sequencing.
You totally should, it's a lot of fun. I'd suggest trying to find some bacterial genome sequencing (like E. coli) done on nanopore if you're interested in those data. I don't have a link to any handy right now, otherwise I'd post here, but assembling bacterial genomes is shockingly easy these days and doesn't need near as many resources as doing a human genome, so it's great for learning (I love the assembler Flye [1] for this).
And RE: home sequencing, honestly the hardest part for a beginner will likely be the sample prep, since that takes some combination of wet lab experience and expensive equipment. I really wish molecular biology was as simple to get hacking on as writing software. The lag time between doing an experiment and getting a result is so much longer than waiting for things to compile, it just makes improving your skills take longer.
yup. that’s the business model for Illumina. it’s very much akin to video game consoles. Illumina might take a hit on selling the machine but makes it up in selling you proprietary reagents.
What sort of books/videos do you suggest so one can learn more? This stuff is interesting, and I've always seen inexpensive lab equipment on ebay.
If this can sequence flora, fungi and human DNA for about 10k - I'd buy it, just to experiment and deep dive. That is such a low barrier of entry it itself is interesting.
Cost/benefit analysis may dictate that, as other posters suggested, you'd be better served to get raw fastq files from a sequencing lab. Even better if you can send the lab a sample and they'll process the extractions for extra $$.
> and i feel like nanopore is the VR of dna sequencing. it’s always just another few years off.
Is this also true for nanopores in protein sequencing? This HN comment from a few weeks back [1] pointed out recent progress but perhaps the tech is still not quite there.
What do you mean by it's always a few years off? Nanopore will allow you to do high-quality genomic sequencing _now_, in a home lab if you wanted, for less than $3K. If you amortize the 3K by the number of genomes you can sequence on the same flow cell, the price per base or per genome falls precipitously, depending on the size of the genome of course.
ya my first thought was how hard are reagents to get, but probably not that hard. i wasn’t in the lab, i was in bioinformatics so i’m generally clueless on reagent acquisition.
This is not the first attempt. Growing tiny brain organoids is fairly well understood, scaling it up is not. I have not read the paper but previous attempts at this have struggled with getting useful outputs out of the neural culture, most of the time the spikes just add up to noise.
Tertiary education at the elite level is rarely about the quality of education. The difference between Georgia Tech and Columbia or Harvard's CS program is not that stark. However, the story is completely different when it comes to alumni network, access to funding, future opportunities. Prestige and network effects compound and an argument can be made for whether we should allow academia to be the gatekeepers of social mobility at the highest level.
Certain Ivies favour grade inflation yet their students do not suffer dilution of their degree value, this is not a privilege extended to many other institutions.
The Ivy League factor plays a smaller role for CS than for other disciplines, due to less gatekeeping. Yale is about University of Minnesota level across multiple computer science ranking measures: https://drafty.cs.brown.edu/csopenrankings/
You are not forced to pay attention to a Yale degree, though? If it affects government funding, OK, you can discuss it.
Building networks is also not a bad thing. It is good if people know and trust each other and know who to turn to for help. It is a stupid idea of modernism or whatever that there should be no networking.
> What differentiates SpaceX from NASA, or SpaceX from Blue Origin, is people and culture. We are not trying to build an institute or academic minded organization where papers are more important than products. Our goal is to build an ambitious, well run, for-profit company that will deliver revenue generating products on the way toward accomplishing its much bigger objective.
It is debatable whether they truely understand the financials of biotech. The grind of basic research will never go away. Many successful biotech company essentially acquihire researchers and work that is already 80% complete, the role of the company is to bring it to production. That itself will make up the bulk of the company's workload. Similarly, SpaceX had the benefit of leveraging an existing pool of talent and resources; you cannot build a heavy launch company in Zimbabwe. If they want to do both active basic research and at the same time trial therapies, then they would need an enormous amount of funding (on the software unicorn level). You will need scale on the same magnitude as Pharma giants like Pfizer, GlaxoSmithKline, Johnson and Johnson to be able to acquire companies, run trials, and discard ideas that do not work. In the current bull market, this is the perfect company to build with Coinbase's founder as the chief fundraiser.
We usually use macaques for this (I haven't read the paper). Is there a review paper comparing both creatures? If they are really better, I should look into procuring some. Macaques are quite expensive in north America.