A lift spring on my old (1995) Chamberlain garage door broke one day. It basically shattered, sending a couple chunks of spring steel flying around the garage bouncing off of all the crap that I have "stored" out there. It was loud. We had no idea what had happened and I went outside trying to track the noise thinking that maybe a deer had run head-first into the garage door or...
Anyway, I decided based on the noises that it must involve something inside the garage. Good luck finding anything in there. I opened the door with the clicker remote and didn't notice any issues so I walked the "path" through all the accumulated things that needed new homes and as I was making my way back out the door I saw an unusual chunk of steel on the floor and a pulley that I know had not been there the last time I was in the garage. I began visually searching everything inside the garage trying to match those items found on the floor and that is when I saw the spring dangling on one side of the door and the lifting cables drooping.
That's when it hit me that I'm lucky our cars don't fit in there any more. All the energy stored in that spring when it popped could've cost me a couple of windshields, some body panel damage, etc but since my garage collects unfinished projects instead of automobiles all of the flying garage door parts bounced off of boxes and the sheetrock walls and did not damage anything important.
We briefly considered calling a garage door installer to deal with it so that we could replace both of the doors (two-bay garage). They had replaced a door on my shop a few years back and were reasonably priced and that Chamberlain door has functioned perfectly. Since the only parts compromised were the springs, pulleys, and cables on one side of the door I decided not to replace the door. There are spring kits available that allow a DIY replacement in a few hours so I went that route. Very inexpensive.
After reading comments here I am so glad I did not buy new doors. The last door we bought was produced before all the enshittified cloud crap. I replaced the remote panel controller this summer with a new, cheap control panel that looked identical on the outside but is slightly different internally since it is a generic replacement for the OEM part. Works great.
I didn't even know that could happen. Garage door springs store a ton of energy and frankly scare the shit out of me. Are they supposed to be replaced over the years or something?
Like you, I also had no idea that one of the springs could shatter suddenly. There is a lot of stored energy in that spring steel when the garage door is closed. My doors are older doors that use a spring configuration that is more dangerous than the modern doors. Modern garage doors use torsion springs I believe and the springs used are wound/unwound around a durable rod so that if or when the spring fails, large parts are constrained from flying off in random directions. The old style spring setup had no means of preventing large chunks of spring steel from exploding into the garage and destroying things. If your garage doors use the old configuration you can make them safer by passing a cable through the center of the spring and firmly anchoring it at each end. That will prevent most of the spring from becoming airborne just as the torsion bar does in modern garage doors. My old doors had zero safety cables so I added a safety cable to each door when I replaced the springs that failed.
Springs do fail. They have a limited number of cycles that they are rated to deliver. Here is a useful link to help understand what type of spring that your doors use and how durable that it is.
This was definitely not anywhere on my list of things to consider when we bought the house more than 20 years ago. I will be replacing the springs with a torsion spring system at some point in the future. Right now they have safety cables installed.
It really doesn't matter what people in the affected companies/industries/gov't agencies believe. The important question concerns what the average person on the ground with no insight into any of this believes. Their information sources will be less reliable, more susceptible to manipulation to drive a narrative, etc and they will come from sources that the individual already trusts.
I had a relative contact me about steps they should be taking now that Iran, based on a report they caught on their local news, is gonna dirty bomb DC.
It's a game of telephone and the American people will not get accurate information from all of their news sources. Many will get information that is intentionally designed to confuse or to drive a narrative. That is what we are up against.
Tech industry people should be out front setting the record straight. When a news service publishes a story about these ongoing events industry people should step in to offer any corrections that may be necessary so that the published material is less useful as a tool and is most useful as an information source.
I mean, shit, did you hear about the general strike in Spain? Or AOC's speech? Sure, you can look them up, but you're getting a narrative of someone else unless you curate your sources.
This is true. I'm not sure that the ordinary Joes on the street understand how to identify a trusted source or even bother to think about checking the sources. Most are too comfortable letting someone else do the thinking part for them.
I read your other posts on this thread. I understand that tools like Mythos represent game-changing tech for those wishing to break things.
I don't see the conclusion that you posit, that there is a nation-state or activist/terrorist group behind these near simultaneous issues as being the only plausible conclusion.
In contrast, I think Mythos and other enhanced capabilities that agentic tools provide has opened the door to hacking and disruptions by anyone with an axe to grind.
So that you know what I am thinking and no longer need to speculate I will tell you that there is a possibility that Russia is behind some of the disruption, especially in Europe because that fits the pattern of activities that we already have established for them. They have a long history of conducting operations to sabotage infrastructure or create divisions between European nations because that fragmentation strengthens their position by weakening potential adversaries. They have a history of denying any connection even when all evidence conclusively implicates them.
As for the group mentioned in your post : "FAA,NSA,MSFT,APPLE,EQUINOR all got hacked in a week."
While Russia or some hacking group could be a player in these events I feel that it is more likely that some or all of the problems they are having employed untested patches to codebases which instead of correcting vulnerabilities, created code instabilities instead and because the codebases affected are shared across many institutions that we are seeing failures across the economy/government landscape as each attempted to patch their own vulnerabilities.
It is certainly easier now than it has ever been to find vulnerabilities, every day seems to bring up a new list of affected modules or software/hardware. It is that observation that leads me to conclude today that there is not a single source or a small collection of operators (nation-state and activist/terrorist group) behind all these problems. There are too many other more plausible explanations.
Hardware "upgrade" takes down a part of the network that can't handle the new, increased load. Software patch breaks functionality because new AI-coded patch was not tested before deployment and there were no experienced humans in the roll-out loop.
The list of organization/entities affected reads like a who's-who of targets that would obviously appear on a list if an outside actor wanted to sabotage an economy or destroy public trust in established institutions. I don't think there is enough evidence for that connection to be made right now though as it applies to the US-based issues. I say that because all of them are caught in the expanding loop of vuln-patching and too many of them do not have the technical personnel on staff to effectively manage all of this and as a result things break.
I am open to changing my conclusion as new evidence rolls in. Today I ascribe these problems to mismanagement of problem resolutions instead of to direct sabotage by outside players.
Show me some evidence. I am just a regular guy, or a cat, maybe a dog woof-woof, out here on the internet but I have watched cybersecurity issues silently for a long time so I didn't arrive at these conclusions yesterday. Over the long term it has become apparent to me that there is real friction in the US when it comes time to apply updates or to upgrade technology and that friction ultimately is the basis for systemic failures as upper management is often not familiar with nor aligned with the technology-based stack of problems or their solutions and instead they focus on nickles and dimes, delaying problem resolutions and often causing issues when it is finally apparent that they must upgrade.
Very true. It is an bot-managed (infested) engagement engine, not a credible source for most things any more. They are driving the narratives that they need in order for them to keep eyeballs on the site. I found this job listing [0] under "Computer Gigs" sidebar for the Dallas Craigslist. I suspect that there are similar opportunities all over the country.
Reddit is done. I'm so glad I got perma-banned by their AI mod. Though the meat-space mods lifted the ban on appeal, I had a long enough interval that I unwound all engagement. I found reddit right after they launched and have spent a lot of time over the last 20 years on various subs. That's all over now.
I guess you may not have spent much time watching birds or other wild animals navigate their environments. Many birds routinely fly at maximum speed through trees, dodging branches, leaves, and twigs that would knock them off course and lighting suddenly on small limbs or branches that you can't even see until you are deep into the foliage. Maybe they can see them from outside the leaf envelope. It would explain how they are able to navigate such a cluttered environment in shadow at full speed. Birds may crash into window glass regularly but their innate understanding of navigation around and through natural obstacles is pretty remarkable.
Watching drone racing videos gives an idea of just how complicated the task turns out to be - flitting through narrow openings at speed and zipping around obstacles that suddenly appear. Birds were doing this millenia before anyone programmed a drone.
Oh yeah. I feed my crow family raw peanuts in the shell. They know me and watch me when I am outside working on anything. One of them taught itself to mimic me. Each time I would put out peanuts for them I would loudly say "peanut" a couple of times. When the group wants a peanut that crow will fly over to a nearby perch and clearly say "peanut". Crows are really intelligent.
I feel that swarms are easier than trees since you just have to rotate slightly for the most part, following the critter in front of you. If you bump, you correct. Trees on the other hand are much less forgiving.
If I had mentioned bird swarms then I would've needed to mention by extension that fish were also just as intelligent, and gnats, and mosquitoes, and wasps, wildebeests, and bison, and on and on through the animal kingdom.
We may even need to throw in humans if one mentioned group dynamics of pedestrian swarms inside transport terminals. I'm not sure that we can say at this point that all the members of a group like that are intelligent. It seems more likely that most are minimally sentient without any understanding of why they do what they do when they do it and probably none could offer a formulaic description of how they do it that would stand up to scrutiny. I think most would just SWAG it.
Yeah, me neither. I opened the link along with several other article links from the front page so it sat idle in a separate private tab waiting for me to get to it and just as I clicked on it MWB popped the warning. I'm using LibreOffice with container tabs and MWB Pro under Win10 Pro. Probably nothing.
I'm not sure why you get downvoted for pointing out that some people have a belief that is not shared by most other people.
Seems that some posters would rather shoot the messenger that delivers information that they don't agree with.
From interacting with domestic and wild animals for most of my life I figured out a long time ago that they understand their own world and their place in it way better than many of us understand the world we have created for ourselves.
In the last photo of the article you can see the lower part of the tile which must've been exposed to the weather.
My eyes may deceive me but I seem to see non-random patterns on the lower half that look like they could also be cursive writing. I wonder whether someone could image the tile with lidar or a scanner or maybe do a sonic density scan across the surface to see whether anything pops out.
Maybe, but given it's in one piece I'm not sure that writing off the same depth would have weathered of without leaving obvious signs of flaking or something. It also seems quite deliberate that the author has used only the half that would be concealed by the next row of tiles, thus allowing it to be used without any issues.
I agree. If there was an indication of writing below it I suspect that they would've already noted that and attempted a reconstruction. If it were my tile I know I would. Even something as simple as a pencil rubbing would help illuminate any other scribbles.
With the resolution of the photos in the article and the fact that it is on the back side of the tile with a line clearly drawn across the tile as if to mark the end of the message it is unlikely to be more text. It just looks non-randomly patterned in that photo view.
Freshwater drum is really common down here in Texas. We've caught them all over the state except in the Panhandle. I haven't fished up there. We always called them drum, croakers or gaspergou. They make a croaking sound as you handle them. As a gamefish, they are spirited fighters. They fry up nicely too though the smaller fish are best. Bring a filet knife, a scaling tool and some pliers, some Crisco and cornmeal and your cast iron skillet and enjoy them right there on the bank. A small sack of potatoes that you can cube and fry also works great as a side dish. If you have a cooler, bring butter.
We also have red drum and black drum down here though they are saltwater species. The black drum can be caught in the transition zone brackish water where fresh/saltwater mixes in the bays.
Since you already suspect that any EMP will come from above why didn't this guy simply turn the trash can upside down and place it over the test setup?
There would be no need to seal anything since the can has a continuous rolled seam. Just use a standard trash can instead of one of those kitchen trash cans that likely has a plastic bottom for easy clean-up.
I use these as planters for my orchard fruit and nut trees. They have no open holes. I have to drill the bottoms or side to add drainage so that the trees don't drown.
That would probably work well with the lid on floor, bin over the top.
I work with an MR scanner. Bluetooth seems to work through the cage (or did on the previous scanner I used) and cellphone calls work though it fine as long as the door is just a tiny bit open.
It’s quite interesting to play with.
The cage drops signal 100db (well, that the spec it’s built to).
Rf leaks are the worst. You can run the scanner in a ‘detect rf’ mode to try find any leaks.
They can be a pinhole, a faulty light, a poorly sealed escape hatch etc.
A bad one can take a very long time to find and it’s enormously expensive to do so.
As a geophysicist, I understand your problem. Pinholes, slit length and width, mesh size, etc will all factor into the suitability for use as a signal attenuator. It comes down to the wavelength of the energy that you're trying to block. Common millimeter or submillimeter wavelengths from ordinary consumer devices make it important to take a hard look at your shielding to identify any stray path opportunities. Transmission and reflection coefficients of the materials and the propagation medium, reflection paths, material density properties, etc. All these things will work with or conspire against you.
a trash can upside down ... on top of what? a shallow mercury bath?
a passing wave, even a distant plane wave, will couple to the EM surface waves of the can surface.
also novices always home in and hyperfocus on reflectivity and transmission attenuation lengths, which works when done properly, but is a complete PITA without using absorbers.
simply placing an unopen plastic water bottle inside the cavity means that any EM energy that does make its way in, would be absorbed, instead of repeatedly reflecting from your perfect metallic reflector walls...
Consider a small 2D patch of metal sheet with some resistivity: any attenuated tails of EM waves will induce currents in the metal, and those currents can flow in all directions in the sheet.
Now consider the same metal sheet with a very fine unintentional slit, while currents can still run parallel to the slit, the metal doesn't admit significant current (ignore electron tunneling across the slit) across the slit, this means a current can circulate around the slit, this is why some of the commenters here point out the issues with slits. Simply placing mating metal lids / doors / ... against metal containers does not guarantee identical conductivity across the formed slit: imperfect planarity (think placing the Alps upside down on the Pyrenees), different metallic phases (annealing etc) at the surface, the spontaneous formation of an oxide layer (aluminum has a thin corundum layer, iron/steels/metals oxidize,...), protective coating layers, ... all contribute to the failure to text-book-reflect an EM waved with a perfect isotropic conductor.
Suppose you wish to protect your empire from an overrun by the barbarians: proper border control is important, but in practice imperfect, so you need a way to absorb or apprehend any barbarians that made their way in.
Thats why you want to place a wideband absorber within your protected cavity. This increases the demand on EMP power to disturb any sensitive devices.
In a reply to another comment I gave a link to the type of trash can that I was thinking about for the cage.
While there may be imperfections in flatness on standard, uncarpeted floors that can allow RF signal to find a path inside (reflections from below or from other angles as another comment mentions) or you could live in a house like mine where flat had a non-standard definition with lots of slop, I believe that you solve those issues by setting the lid upside down on the floor, placing your apparatus inside the lid, then covering and sealing it with the inverted trash can.
You should have plenty of signal attenuation either way.
Trash can lids are usually not so flat, which makes the whole thing wobbly. The ones you linked lack a handle on top, but it's a common feature on metal cans.
>Presumes the floor (or other surface) is perfectly flat...
with your reply to that comment:
>And that the floor will attenuate any reflected EMP/signal from underneath (should be small in a basement, but ...)
I believe that I addressed those issues in my reply to the other poster.
>Trash can lids are usually not so flat, which makes the whole thing wobbly.
Very true but simple to accommodate for even if the wobble has zero effect on its signal attenuation characteristics. If the can that I linked topples in the wind it will not affect the seal at all. That is a very durable can with a dependable grip on the lid.
>The ones you linked lack a handle on top, but it's a common feature on metal cans.
True that handles are common on trash cans. I buy that trash can specifically because it does not have a handle and therefore it has no holes or slits in the lid. The dish shape makes it suitable for use as a shallow, very durable bird bath or water feature for attracting bees and other insect pollinators. When you have a lid like that one you can get a cheap solar-powered floating aerator/sprayer and add a few rocks and a piece of weathered driftwood for perches. Bees, wasps, dragonflies, butterflies, moths, etc will make good use of the small fountain feature. Fountains that I have scattered on my place draw all kinds of insects and birds. A few weeks ago I had a snake slither over to one of them and spend a few minutes dipping its chin for a cool drink.
I plant trees and other plants in the can and use the lid for water features.
It reminds me more of the old Windows firewall/IPS/IDS called Sygate. It was ahead of its time. I think Zonealarm came after since that is what I replaced it with after Symantec(?) bought Sygate and rolled the best functions of Sygate into their Professional firewall for a premium price. Sygate was free or you could buy a permanent license for a one-time fee. It was the best personal protection products available for pcs running Windows up to WinXP.
I had also tried a different firewall/privacy tool from a company in Canada I think called ZeroKnowledge. That was a great product that also allowed you fine-grained access to and control of all connections to/from your Windows pc. They had a product available for a short time but shut down suddenly. I think I read that they were bought out by another firewall company but can't remember which one. They may have been rolled into the Blackberry software line.
Both of these were available in the 90's lead-up to the dot com bust if I remember right. Sygate became obsolete when support ended around the time WinXP faded. ZeroKnowledge disappeared much earlier. I may have old executables and installers somewhere on antique backups.
Anyway, I decided based on the noises that it must involve something inside the garage. Good luck finding anything in there. I opened the door with the clicker remote and didn't notice any issues so I walked the "path" through all the accumulated things that needed new homes and as I was making my way back out the door I saw an unusual chunk of steel on the floor and a pulley that I know had not been there the last time I was in the garage. I began visually searching everything inside the garage trying to match those items found on the floor and that is when I saw the spring dangling on one side of the door and the lifting cables drooping.
That's when it hit me that I'm lucky our cars don't fit in there any more. All the energy stored in that spring when it popped could've cost me a couple of windshields, some body panel damage, etc but since my garage collects unfinished projects instead of automobiles all of the flying garage door parts bounced off of boxes and the sheetrock walls and did not damage anything important.
We briefly considered calling a garage door installer to deal with it so that we could replace both of the doors (two-bay garage). They had replaced a door on my shop a few years back and were reasonably priced and that Chamberlain door has functioned perfectly. Since the only parts compromised were the springs, pulleys, and cables on one side of the door I decided not to replace the door. There are spring kits available that allow a DIY replacement in a few hours so I went that route. Very inexpensive.
After reading comments here I am so glad I did not buy new doors. The last door we bought was produced before all the enshittified cloud crap. I replaced the remote panel controller this summer with a new, cheap control panel that looked identical on the outside but is slightly different internally since it is a generic replacement for the OEM part. Works great.
reply